ST-031M Designed for the detection of radio-emitting STM (scanning tunneling microscope) channels of VF devices intended to transmit information. The device has the best "cost capability" price-to-power ratio across the device class, it is an oscilloscope and spectral analyser modes.

Designed for the detection of radio-emitting STM (scanning tunneling microscope) channels of VF devices designed to transmit information. The device has the best "cost capability" price-to-power ratio across the device class, it is an oscilloscope and spectral analyser modes. 

SecurityST031M-901 ( ST-031M) multifunction vf detection device:

Radio microphones, radio and telephone stethoscopes from a transmitter, which also includes devices, working on short pulses or sophisticated modularity;

STM equipment that uses conductive linthose at extremely high frequencies;

Microphones using conductive cables of different lengths in voice frequencies;

Various transmitters, working in IR, UV radiation and ultrasonic ranges.

The device also gives the user the opportunity to identify and analyze acoustic and other vibration threats of natural origin. 

Functionally the device consists of three separate detection channels, each operating within a separate signal range. A specialized set of antennas, sensors and reduction is used to adapt the device to different STM device conditions and natural leak detection feeds. The device is controlled by twelve keys. The results of the detection procedure are shown on the Color-LCD display. The detector interface is simple and intuitive. Its design takes years of experience in the operation of previous models.

The detector works in both systems - oscilloscope and spectral analyser modes.

For the detector we also offer a VF function tester that imites the operation of various VF devices, bedbugs, VF cameras or GSM phones.

The device can identify all standard digital information of broadcast channels (GSM, DECT, Bluetooth, WiFi and etc.) 

SecurityST 031M-901 Multifunction Detection VF Device has a PC function – a connection that allows visualization of information, archiving options are almost unlimited. The standard USB port guarantees the user the possibility to upgrade the software that we send you free of charge,

The multifunction detector contains:

Basic model - 1 set;

Antenna - 1:

Line adapter - 1 to se.

Tlf. adapter - 1:

Universal "connection to conductive lines" module - 1 set;

PC cable - 1 pcs;

USB flash card + software - 1 cs;

Technical documentation and operating instructions -1 pcs;

To get the best result from this product, you should also consider purchasing equipment (code 903):

UHF module (up to 18Ghz) -1 ks;

Vibration-sensor - 1 pcs;

Acoustic sensors -1 ccs;

Magnetic antenna - 1 ks;

Electrical antenna - 1 ks;

Optical sensor IR - 1 pcs;

Set of cables and adapters - 1 piece;

Specifications:

Frequency range, 30-4500MHz       

Frequency range up to 18 GHz (with optional UHF mod).

Transmission band, 1-50MHz    

Sensitivity, -65 dBm

Scan speed, 20 GHz / s

Dynamic range, 50 dB

Diapasone receiver scanner, 0.05-30 MHz

Transmission band, 40 MHz

Sensitivity, 20 dBm

Scan speed, 3 GHz / s

Dynamic range, 60 dB

Demodulating AM / FM

Low frequency amplifier Frequency range, 0.02-100 kHz

Amplifying ratio 0-40 dB    

Input impedance, 100 com

Audio filter range 0.3-4.5 kHz