Audio-Video End Stage Transmitter Receiver 640-FOX850

850mW end stage for transmission of audio and video signals in the 1.2GHz band.

Audio-Video End Stage Transmitter Receiver 640-FOX850

850mW end stage for transmission of audio and video signals in the 1.2GHz band. This is a professional product. The possible range of audio, video signals is up to 1-2km even on the antennas that are included. There is no problem of using directional antennas, this step will increase the range.

The device uses 8 channels for possible video – audio transmission.

This is that you can independently use eight devices at the same time.

The transmitter has a durable aluminium cover that also serves to drain heat.

Note: DO NOT switch the appliance on without !!!

Video transmission is possible in any of the eight channels in 850mW power.

You can only connect the device to the camera via audio- video cable and receiver to the TV, also with the help of a video-audio cable and watching.

Set of very powerful transmitter and receiver for wireless transmission of color composite A / V signal. Compared to the product " Transmitter Receiver 640-FOX250" has 4 times the transmission power and thus significantly greater range and resistance to interference. Both modulation and demodulation are controlled digitally, so just select the channel on which you want to transmit the video signal. There are 8 channels; it is therefore possible to operate the simultaneously transmission of up to 8 images, including sound in one location, completely without the risk of interference with individual systems. The selected channel is shown by the segment LED viewer on both the transmitter and the receiver.

Transmitter works with pal color signal. At the transmitter input you will find two CINCH connectors for composite video signal and sound. You can find the same connectors at the receiver output.

Parameters:

Powerful PAL video transmiter

Broadcast band: 1.2 GHz (channel 1: 1,080 GHz, channel 8: 1,360 GHz)

Transmitter dimensions: 45 × 53 × 18 mm

weight: 77g

Transmitter power supply: 12V / 350mA

Broadcast power: 850mW

Receiver dimensions: 140 × 80 × 22 mm

weight: 126g

Receiver power supply: 12V / 200mA

Following the recommendation of the TUSR, the product in question was withdrawn from the fi advertising system. Market.sk the fact that the importer or manufacturer has not been identified and there is reason to believe that the production in question does not comply with Paragraph 10(1) of the VAT Code. Article 3(6) and (7) of the Law of Conformity do not comply with the requirements for the efficient use of spectrum under Paragraph 3(1) of the Act of Conformity. 2NV 443, the sale and subsequent operation of the equipment offered could cause significant operational problems for spectrum users.