DDS signal generator signal source, can be used power supply DC 5V 

Sinusovary output, rectangular (the operating cycle can be 1% -99% setting), triangle wave, and serrated Variety of features offered, such as curves, maximum power up to 10Vppfrequency from 0.01 Hz-5Mhz resolution 10MHz also has TTL synchronization output and 60MHz frequency counter three functions in one.

 Properties:

- High frequency resolution: 0.01 Hz

- High Frequency Accuracy: ± 20ppm

- Low distortion: <1%

- Rectangular operating cycle 1% to 99% precise adjustment

- Triangular wave modulation sparing output two saw

- Variable DC control level

- External Frequency Measurement

- Default stored frequency, transferred

- Interface

- Output signal function (main signal output)

- TTL output

- External reading input

Technical indicators:

- The main output of the sinuses, rectangle, triangle waves, serrated

- Maximum output amplitude 10Vpp (no load)

- Output impedance 50Ω ± 10%

- DC bias ± 5V (no load)

- Operating cycle range 1% -99% (rectangular course)

- LCD1602 display

- Output frequency: 

- Sine 0.01 Hz-5MHz 

- Rectangular 0.01 Hz-1MHz (valid range)

- Wave triangle 0.01 Hz-1MHz (valid range)

- Saw 0.01 Hz ~ 1MHz (valid range)

- Resolution 0.01 Hz

- Frequency stability ± 1 × 10-6

- Frequency error ± 5 × 10-6

- Sine Wave distortion <1% (reference frequency is 1 kHz)

- Linearity triangular waves ≥ 98%, 0.01 Hz ~ 100 kHz;

- ≥ 95%, 100kHz ~ 1MHz;

- Rectangular Rise and Fall times <30ns

- TTL output TTL level ≥ 3 Vp-p

- With a load capacity of 20TTL load

- Outside measurement function:

- Frequency range: 1Hz-60MHz

- Signal amplitude: 0.5Vpp-20Vpp

- Out of counting range: 0 -4294967296

- memory per 10 frequencies

Properties:

Using fpga design is easy to use and high signal stability. It also has TTL output and external frequency measurement functions; output signal can adjust the amplitude and direct current compensation

Suitable for laboratory, engineering and enthusiasts.

Signal aspects: GENERATOR is able to generate sinus, square, triangle and hacksaw

Measurement: The meter has frequency and counting functions

Scan aspects: It has scanning capability and can achieve frequency mixing with any start and end point.

Storage and Recall: With 10 locations to store parameters (M0~M9), M0 data can be retrieved when switched on.