VF BROADBAND AMPLIFIER 50 TO 5000 MHZ

€193.73
VAT included
157.5 EUR tax excl

Frequency range 50 to 5000 MHz,

impedance of 50 ohms,

VF broadband amplifier 50 to 5000 MHz

 

Safe shopping

 

Fast delivery

 

Hassle-free return of goods

VF broadband amplifier 50 to 5000 MHz

Frequency range 50 to 5000 MHz,

impedance of 50 ohms,

VF broadband amplifier 50 to 5000 MHz

Specifications:

Frequency range 50 to 5000 MHz,

impedance of 50 ohms,

amplification/ noise level (type:): 200 MHz 20/1.9 dB-500 MHz 25/2.0 dB-1000 MHz 23/2.0 dB-3000 MHz 16/2.8 dB

N-socket, line voltage 10 - 20V,

current sampling 12 V 65 mA,

weight of 500 gr,

Max. Mast 58 mm diameter

50Mhz-5GHz Preamp

Top-quality technology in its loftiest form: a modern chip sige amplifier on a low-loss ceramic microwave substrate and the use of a microtape N socket will emit a low noise level image along with a high gain over bandwidth of 5 GHz.

Excellent large-signal from the LNA-5000A hearing is demonstrated by IP3> 30 dBm. Intermodulation interfering a large amount of signals with a larger antenna is therefore almost impossible.

The LNA-5000 thus classifies as a curata amplifier for many applications, whether it's as a preamplifier for scanners, receivers, or to increase the sensitivity of measurement systems.

The LNA can also be used as small-power amplifiers with linear output power of up to 20 dBm. The amplifier can be too krmeni either in a direct or distant (via coaxial cable) way. The supply voltage is internally stabilized. Due to weather-proven housing in the LNA-5000 can be connected directly to the antenna mast. The pole clamps are hot-DIP galvanizing, all the screws and nuts are stainless steel.

Recommended DC-spray: DCC-5000.

Technical data

Frequency range 50 - 5000 MHz

Impedance 50 Ohm

Gain/Noise Image (type.):

@ 200 MHz 20/1.9 dB

@ 500 MHz 25/2.0 dB

@ 1000 MHz 23/2.0 dB

@ 3000 Mhz 16/2.8 dB

Socket N-female

Operating voltage 10 - 20V

Current Drain: 65 mA at 12V

Max.Field diameter58 mmSSB LNA 5000A broadband Mastvorverstärker 50 to 5000 MHz with excellent high signal behavior (IP3> 30 dBm) and very low noise image for many applications: for scanners, sensitivity of the receiver, or for improving measurement systems. Even as a small signal amplifier with a capacity of up to 20 dBm output usable. Gain approx. 20 dB, noise picture approximately 2 dB, N-jacks, voltage 10-20V, internally stabilized. Remote power supply directly, or via coaxial cable, weatherproof - Mastschelle.

278
10 Items

Reviews

No customer reviews for the moment.

Write your review

VF BROADBAND AMPLIFIER 50 TO 5000 MHZ

Frequency range 50 to 5000 MHz,

impedance of 50 ohms,

VF broadband amplifier 50 to 5000 MHz

Write your review