The purpose of the system is to detect unauthorised transmission within the controlled area.

• Meeting rooms and offices

• test rooms and test equipment

• Prisons and correctional facilities

• Areas with limited use of mobile phones, radio, etc.

RF Monitoring System - ST154XX/2019 - RF Tracking System

The main purpose of the system is to detect unauthorised transmission within the controlled area.

These areas include:

• Meeting rooms and offices

• test rooms and test equipment

• Prisons and correctional facilities

• Areas with limited use of mobile phones, radio, etc.

The device has different modifications, therefore it is necessary to determine the scope and size of the room.

Detects:

• RF eavesdropping devices

• Wireless data transmitters (4G, WLAN, BLUETOOTH 2.4 and 5 GHz), wireless telephone systems (DECT), as well as special technical equipment using these data transmission standards (e.g. CDMA450, GSM 900, GSM 1800, 3G)

• Analog radio transmitters 

* Set cellular frequencies depending on country and mobile operator.

Simultaneous monitoring from 1 to 128 local areas.

No special training is required.

Many opportunities to choose a system configuration.

Data transmission over wired (WLAN) and wireless (ETHERNET) networks.

GENERAL DESCRIPTION

The main unit of the system is the control module (cm), which performs the reception and analysis of signals.

The CM recognition area depends on many factors and the estimated average value is 10 to 50 square meters.

The appearance of illegal signals is displayed by light and sound signals directly to cm or transmitted via ETHERNET or WLAN to the computer checkpoint.

A desktop computer, laptop, or Windows-compatible tablet that has special software installed on your computer can be a computer.

Ensures continuous monitoring of the radio environment and event log

In addition, there is a search module (ver S) that ensures the exact location of the radio transmission device.

DESCRIPTION Of SM

CM consists of:

• a radio unit with a separate highly sensitive 3G band circuit.

• transceiver to ensure communication via WLAN networks (ver - W) or ETHERNET (ver E / ver E + POE) 

The surface cm has:

• Power connector

•Switch

• SMA connectors to connect RF antennas.

• LED alarm.

• USB connector 

The parameters of the light and sound alarm are set via the USB port.

DESCRIPTION ver S

The surface ver S has:

• Charging connector

•Switch

• SMA connectors to connect RF antennas

• OLED display with receive signal strength indicator (RSSI)

• USB connector

SYSTEM CONFIGURATION OPTIONS

The minimum configuration consists of a single CM with a light and alarm alarm (ver. Preset is performed via a USB port.

This option is designed primarily to control the radio environment within a single room.

To cover more than one room in a multi-storey building is a variant with alarm transmission to the computer checkpoint via WLAN (ver W) or ETHERNET (ver E / ver. e + POE) using a specially created or existing network.

Software

The CM configuration can be done both separately and for the entire system. Also, there are many setup options. There are special patterns of ignoring frequencies for cellular, mobile, and wireless data bands. 

Each CM is assigned its virtual image, which allows you to monitor changes in radio emissions in real time.

For convenience, virtual images are placed on the screen, for example, in accordance with the floor plan of the supervised area.

The direction search mode for the location of the transport source is available when using multiple CM

Silent recording mode is always enabled, and there are many options for sorting events depending on the criteria you need.

Configure ETHERNET and WLAN networks.

Find a radio source

There are two ways to find a radio signal source:

• Data processing is available from three or more CM. The location of the RF device is displayed immediately in the floor plan.

• Use SEARCH MODULE ver. S. Signal information is transmitted to the SEARCH MODULE via a USB port. The search is based on the signal level indication on the SEARCH MODULE screen. "

The supply file consists of:

- module (ver. And, believe me. W, believe it. E or ver. E + POE) 1-128

-Search module ver. S 1 (optional)

- Power adapter 5V 1A 1

-USB flash drive with software 1

-USB cable 1

-Bag 1

- User Guide 1

Specifications:

Frequency range 25-6000 MHz

Threshold sensitivity, dBm

CDMA450, GSM900, 1800, 4G -80, 3G -100

Maximum input level, dBm -5

USB, WLAN, ETHERNET,

Supply voltage, 5V

Current consumption, mA not more than 500

Dimensions without antenna, mm 109x60x27

Technical specifications Of SM

Frequency range 25-6000 MHz

Threshold sensitivity, dBm

CDMA450, GSM900, 1800, 4G -80, 3G -100

Maximum input level, dBm -5

Usb

Indication OLED display 160x128

Power Rechargeable Lithium-ion Battery

Current consumption, mA not more than 500

Dimensions without antenna, mm 109x60x27