8X GSM hub suitable for GSM amplifiers for branching GSM signals. 800-2500MHz GSM 3G, 

PD2980 is compatible with RoHS, 8 band, broadband, 50 ohms, high frequency power divider, power combiner equipped with N connectors. All wireless frequencies in the range 698 to 2700 MHz are covered by optimal RF performance. Maximum microwave input power up to 40 watts can be handled in both power-sharing applications and power combinations. 

The GSM hub is suitable for branching GSM signals within the building into more self-separated rooms.  

At the heart of the unit is a precision designed and etched Wilkinson microtape circuit on a low-loss, high-frequency dielectric substrate. Wilkinson microtape circuit passes direct current to all ports, making it ideal for use in active systems. There are also power splitters that pass through DC to select ports and block DC for others. 

The electrical power is highlighted by a maximum input loss of 1.3 dB (above power distribution -9.03 dB), insulation of 22 dB min, maximum input VSWR of 1.35:1 and maximum output VSWR of 1.15:1. The same power and balance distribution is shown at 0,5 dB of maximum amplitude equilibrium and 6 degree maximum phase equilibrium. 

The performance of the narrow RF band in your frequency range can be even better. For details, refer to the 8-way power divider tests.

Mechanical properties include precision CNC, brass, 50 ohm female type N coaxial connectors with three-alloy plating to ensure scratch resistance and low PIM operation. The connecting pins are made of gold plated phosphorus bronze for reliability and low contact resistance. Virgin PTFE support insulators for electrical safety capture contact pins and allow seamless connection of coaxial connectors. Long-term operation and excellent shielding is provided by a robust aluminium housing made of CNC material with a clear chemical film surface. The safety installation is provided by four holes with a diameter of 0,125 mm (3,18 mm) through the holes. The RoHS design includes an unlolated solder and a hexavalent chrome-free finish.

Osprey power separators (also known as high frequency lifting devices or coaxial hubs) are available with an impedance of 50 ohms. 50 ohm splitters/ coaxial hubs can be purchased on a 2-way, 3-way, 4-road, 6-way, 8-road, 12-way, 16-way or even 24-way basis. More ways will be available against the customer's request. Many of our high frequency splitters/splitter products are rohs and reach.

Hubs/splitters and RF energy dividers are used to divide one high frequency line into more than one line and power distribution, and similarly combinations are used to combine more than one power line into one. 8-way active energy divider (also known as coaxial energy divider) with N type connectors. 

This 8-way active power divider / power divider has a maximum gain of 0 ± 1 ; 10 ± 1. The maximum input VSWR of this hub/divider is ≤ 2.0 and the minimum insulation is ≥ 20. 

Internal use

Base station

4G / 5G / LTE / AWS / PCS / PMR / UMTS / TETRA / WIFI / WiMAX

Distributed Antenna Systems (DAS)

Wireless infrastructure

SMA, N-Type, F-Type, BNC, 2.4 mm and 2.92 mm connectors

50 ohm standard impedance.

Operating temperature from -30 ° C ~ + 70 ° C

Optional frequency (MHz) 800 - 2500

Gain (dB) 0 ± 1 

Insulation (dB) ≥ 20

Standing wave ratio (VSWR) ≤ 2.0

Impedance (Ω) 50

Noise value (dB) ≤ 2,0

N connector type

Power (W) 30

Operating temperature (°C) -40 ~ + 50

The 8-way, N female (jack) splitter combiner is ideal for a wide range of wireless high frequency microwave applications on both the broadcast and receiving sides, from the combination of amplifier and receiver to antenna splitting, and is deployed worldwide wide in networks spanning the 700 MHz public safety band, 800 MHz cellular, GSM 850, 900, 1800 and 1900, PCS 1900, 1 GHz to 2 GHz L-band, GPS, W-CDMA-3G, UMTS, TETRA, RFID, IEEE802 0.11b/g, 2.45GHz ISM, Wi Fi and 2.3GHz and 2.5GHz WiMAX.