Application

For the CM-DKN air obstacle, the room controller is suitable for all serial synchronizing flashing work of our company's synchronization obstacle and for monitoring the functional state of the light. This product is an interior type, waterproof according to protection class IP43, which can be used directly in the indoor environment.

Key feature:

• Use steel casing and spraying techniques, corrosion resistance, anti-UV.
• The voltage of the power circuit and the signal control line is the same, so the connection of the wires is simple and reliable, it will not cause damage to the lights and the controller when you briefly connect the fault line.
• The control circuit uses MCU control, it can simultaneously control a load power of 4,000 W / synchronized to 200 aircraft obstacle units flashing or still.
• The controller has 3 types of operating modes: automatic, manual, closing.

Automatic mode: automatic switch-off during the day, switch-off of the light control output; automatically turn on at night and the light control output in aviation.

Working in manual mode: the working state is forced open

Work closing mode: the working state is forcibly closed, three operating modes can be switched by the user.

• The controller can also adapt the fault alarm function when one of the lights operating abnormally has failed, the control indicator can be displayed, it can also use dry contacts to alarm the outside environment.
• The function of this driver Market.sk Slovakia is very strong, the performance is reliable and safe. Use and maintenance are simple and convenient; and with surge protection (backlit In15KA / 5 times, Imax 40KA), can be applied to poor working environments.